Investigation of the chemical stability of the laser-induced fluorescence tracers acetone, diethylketone, and toluene under IC engine conditions using Raman spectroscopy.

2013: SCEichmann; ALeipertz; TSeeger; JTrost; LZigan;

Appl Opt.2013;52(25):6300-8.10.1364/AO.52.006300.

NLM PMID: 24085091

Article abstract

This paper reports on an investigation of the chemical stability of the common laser-induced fluorescence (LIF) tracers acetone, diethylketone, and toluene. Stability is analyzed using linear Raman spectroscopy inside a heated pressure cell with optical access, which is used for the LIF calibration of these tracers. The measurements examine the influence of temperature, pressure, and residence time on tracer oxidation, which occurs without a rise in temperature or pressure inside the cell, highlighting the need for optical detection. A comparison between the three different tracers shows large differences, with diethylketone having the lowest and toluene by far the highest stability. An analysis of the sensitivity of the measurement shows that the detection limit of the oxidized tracer is well below 3% molar fraction, which is typical for LIF applications in combustion devices such as internal combustion (IC) engines. Furthermore, the effect on the LIF signal intensity is examined in an isothermal turbulent mixing study.

Title and Abstract from MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine.
Data mined from MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine.

Last MEDLINE®/PubMed® update: 1st of December 2015